News

Preventing Fence Sagging Tips for a Sturdy Installation

Mar 21, 2025

Preventing Fence Sagging Tips for a Sturdy Installation

Fence sagging prevention can be achieved if you follow these sturdy fence installation tips. Today, we’ll take a look at securing Betafence’s EasyView and DeltaView fencing solutions to ensure they remain stable and secure over time.

Posts

Although EasyView and DeltaView fence panels are rigid, they can sag at the posts if not properly secured. The first thing to ensure is that you are using strong Betafence posts and that they are properly spaced.

  • Dig post holes at least 900 mm deep (or deeper, depending on the soil conditions) to provide a stable foundation.

  • Use an appropriate concrete mix to secure the posts and prevent movement over time.

  • If installing on an established concrete surface, bolt the posts down using a baseplate for added stability.

Fixators

When installing EasyView or DeltaView panel fences, using the supplied nylon or metal fixators correctly is crucial. These fixators allow you to attach the panels to the posts without having to drill holes through them.

  • Install at least three fixators per post, though this may vary depending on fence height.

  • For shorter fences, such as the EasyView DIY solution (1.14 m to 1.71 m high), two fixators per post may be sufficient.

  • For taller fences, such as the DeltaView high-security fence (up to 2.4 m high), four fixators per post may be required for maximum security.

Ensure the fixators are properly attached to prevent misalignment and instability. Loose fixators can pose a security risk and may cause the fence to shift over time.

Lastly, always check panel alignment before tightening the fixators. Misaligned panels can prevent the fixators from securing properly, leading to an unstable fence. Using a spirit level and a string line will help keep everything straight.

Secure Your Fence with Betafence

We hope you found this DIY fence guide helpful! With Betafence’s EasyView and DeltaView fencing solutions, sturdy fence installation is easy thanks to our robust designs and high-quality fixators that are perfect for fence sagging prevention. Contact us now to learn more or visit our online store to explore our range of fencing solutions.

FAQs & Answers

1. What causes a fence to sag over time?
Fence sagging is typically caused by improperly installed posts, insufficient depth when securing posts in the ground, weak or loose fixators, and poor alignment during installation. Over time, environmental factors like wind and rain can worsen these issues if the fence hasn't been securely anchored.

2. How deep should fence post holes be to prevent sagging?
Post holes should be at least 900 mm deep, or deeper depending on your soil type. This depth provides a strong foundation, preventing the posts from shifting or leaning, which is a common cause of fence sagging.

3. Can I install EasyView fences on concrete surfaces?
Yes, EasyView fences can be installed on concrete using base plates. The posts are bolted down onto the concrete surface, allowing for a stable installation without digging holes, making it perfect for patios or paved areas.

4. How many fixators do I need for a Betafence panel?
The number of fixators depends on the height of the fence:

  • For shorter fences (e.g. EasyView 1.14m to 1.71m), two fixators per post are typically sufficient.

  • For standard panels, three fixators per post are recommended.

  • For taller panels (e.g. DeltaView up to 2.4m), use four fixators per post to ensure stability.

5. What type of concrete should I use for fence posts?
A standard ready-mix concrete suitable for outdoor applications is ideal. It should set quickly and be weather-resistant to hold the posts firmly in place and reduce movement over time.

6. How do I make sure my fence panels are level?
To keep your fence panels level:

  • Use a spirit level during installation

  • Stretch a string line between the start and end posts

  • Align each panel with this reference before tightening the fixators

7. Are Betafence fixators reusable?
Betafence fixators are designed for long-lasting, secure use. While they can be removed, reusing them is not always recommended if damaged or worn, as this could compromise fence stability.

8. Do EasyView and DeltaView systems require drilling for installation?
No, both EasyView and DeltaView panels are designed to be secured to the posts using nylon or metal fixators, without drilling into the panels. This ensures a cleaner look and easier installation.